TECHNICAL SUPPORT

Step1: Before making live broadcast, you will need to check the following.Play the stream address in the encoder with the VLC player and confirm that it can play normally.Make sure you have upgraded the newest firmware for RTMPS.Canon camera don't have audio output, you will need to input an externa

SRT Protocol configurationTwo modes are available for live video streaming hardware: Caller / ListenerSelect “Listenser”1. SRT Port: default. customers can modify it, but suggest to set it more than 1024.2. SRT delay: default.3. SRT Key: set a password of at least 10 digits4. Press the “set up” butt

ORIVISION's video encoder hardware converts SDI/HDMI/VGA base-band video to H.265/h.264/MJPEG IP streams, to achieve remote video transmission or live across internet WAN or over local network LAN. They support the most common protocols including SRT, RTMP, RTMPS, RTP, HLS, UDP, RTSP, Onvif, and are

SRT (Secure Reliable Transport) is a royalty-free, open-source video streaming transport protocol that delivers secure low-latency streaming performance over noisy or unpredictable (lossy) networks such as the public internet.SRT has two modes: listener, caller.This is a detailed step-by-step video

How to streaming to Youtube live via RTMP/RTMPSStep 1: Before making live broadcast, you will need to check the following.Play the stream address in the encoder with the VLC player and confirm that it can play normally.Make sure you have upgraded the newest firmware for RTMPS.Canon camera don't have

1. Before making live broadcast, you will need to check the following.Play the stream address in the encoder with the VLC player and confirm that it can play normally.Make sure you have upgraded the newest firmware for RTMPS.Canon camera don't have audio output, you will need to input an external au