Email Us
Video Encoder

Technical Support

Providing customers with professional technical support, advices, video guide.
How to Set SRT Protocol
Two modes are available: Caller / ListenerSelect “Listenser”1. SRT Port: default. customers can modify it, but suggest to set it more than 1024.2. SRT delay: default.3. SRT Key: set a password of at...
More >
30
Sep
How Set the Video Encoder and Decoder on Vmix Software
1. The Listener mode of VMIX receives the SRT stream pushed by the video encoder1.1 Check your IP address of your PC1.2 Keep the network segment of the video encoder and your computer in the same netw...
More >
23
Feb
How to Streaming on Wowza by RTMP
lf can't log-in the decoder by the default lP or your set lP, pls Insert a needle into the "RST" holeand press the reset button, the indicator light of "STA" will twinkle fast. When the indicator lightof "STA" is off, reset successfully.All parameters will be initialized.
More >
08
Aug
How to Streaming to Facebook Live Via Rtmps(EH901&ES901)
How to streaming to Facebook live via RTMPS1. Before making live broadcast, you will need to check the following.Play the stream address in the encoder with the VLC player and confirm that it can play...
More >
30
Sep
How to Streaming to Facebook Live Via RTMPS?
Play the stream address in the encoder with the VLC player and confirm that it can play normaMake sure you have upgraded the newest frmware for RTMPS. Canon camera don't have audio output, you will need to input an external audio.Microphone is not an audio source.
More >
08
Aug
How to Streaming to Youtube Via Rtmp(EH901&ES901)
How to streaming to Youtube live via RTMP/RTMPSStep1: Before making live broadcast, you will need to check the following.• Play the stream address in the encoder with the VLC player and confirm tha...
More >
30
Sep
How to Streaming to Youtube Live Via RTMP/RTMPS?
Play the stream address in the encoder with the VLC player and confirm that it can play normally.Make sure you have upgraded the newest frmware for RTMPS. Canon camera don't have audio output, you will need to input an external audio.Microphone is not an audio source.
More >
08
Aug
How to Login and Configure a Video Encoder?
Most of customers can't log in the control panel of video encoder by directly enter 192.168.0.31 in browser. The reason is that the IP address of video encoder (192.168.0.31) and IP address of PC (laptop) are not in the same network segment, so you can't communicate each other. In order to log in the control web of video encoder, you need to change the IP address of PC (laptop) first.
More >
26
Sep
How to Update the Firmware
If you had bought our products and want to check the newest firmware, pls mail to support@orivision.cn1. Tell us your product's model2. When and Where did you buy it?3. It's better to attach t...
More >
30
Sep
Some Practical Solutions when Using the Video Encoder
1. Unable to log in to the encoderA: Please confirm whether the IP address of the encoder is correct;whether the two indicators on the encoder are both on;whether the network connection is normal;When...
More >
30
Sep
How to Set Up Your Video Encoder-Suitable for V700 Series
ORIVISION hardware video encoder, apply to tv broadcast, education, medical training, healthcare, live events, public security, conferences, medical training…This video covers the following parts:1. ...
More >
23
Feb
How to Set SRT in The Encoder and Decoder-Suitable for V700 Series
SRT (Secure Reliable Transport) is a royalty-free, open-source video streaming transport protocol that delivers secure low-latency streaming performance over noisy or unpredictable (lossy) networks su...
More >
23
Feb
How to Restore The Encoder (Boot State)-Suitable for V700 Series
Simple steps, reboot the ORIVISION's video encoder, this video tutorial is suitable for V700 series encoders, such as EH901/ES901/EV901.
More >
23
Feb
How to Restore The Encoder (Boot State)-Suitable for V500 Series
Simple steps, reboot the ORIVISION's video encoder, and this video tutorial is suitable for V500 series encoders, such as EH201/EH301/EH311/EH401/EH404/EH408.
More >
23
Feb
How to Reboot The Decoder (Boot State)
Simple steps, reboot the ORIVISION's video decoder!
More >
23
Feb
How to Set OSD Overlay in The Encoder
ORIVISION's video encoders support OSD overlay function, and the video tutorial is suitable for V500 series encoders, such as EH311/EH401/EH404/EH408.
More >
15
Mar
Any questions? ORIVISION helps!
Any questions? ORIVISION helps!
Get ORIVISION product price, specification, service and more
Contact us